Handmade Music Clubhouse

Cigar Box Guitar Headquarters - CBG HQ

I am building a small router stand similar to the one you can get from Stew Mac for the Dremel. It's nearly done, just wanted to ask if anyone has a tip for me regarding the clamp which will hold the router.There is no thread, just a 20mm steel ring; and of course I don't have a 2omm metal bit, just 22, but I don't have metal that thick anyway.
On the right you can see a wooden collar I made, but it's not really the best solution, so if you have any ideas it would be great.
The best thing would be to place the collar under the top plate so I get the depth.

 

I posted the photos here:

 

http://handmademusic.ning.com/photo/albums/homemade-tools-1

 

cheers,

 

RIchard

Views: 49

© 2021   Created by Ted Crocker.   Powered by

Badges  |  Report an Issue  |  Terms of Service